From preparing and recovering material to melting, heating and shaping it. Explore equipment and project configurations around the process you need.
From preparing scrap to melting and shaping recovered metal. Explore the equipment by process.
Prepare and recover metal with shredders, crushers, shears, cable and motor equipment, screening and separation stages.
Explore the range
Plan metal melting and remelting around the charge, furnace configuration, cooling circuit and required molten-metal handover.
Explore the range
Explore chamber, trolley, tube and continuous furnaces, workpiece heating, drying and related thermal process equipment.
Explore the range
Compare ingot and billet casting, rolling, wire drawing, molding-sand preparation and casting finishing equipment by the required product.
Explore the range
Discuss compaction of scrap metal, machining chips and recovered packaging materials around the feed and required bale or briquette.
Explore the range
Define project scopes for electronics, solar panels, batteries, radiators, plastics, tires and composite-material recovery.
Explore the range
A dry copper wire granulation range for turning insulated scrap cable into copper and plastic granules. Crushing, vibration…
Process illustrationA scrap metal baler compacts prepared loose material into a defined bale for handling and the next operation. Selection…
Configuration on requestView equipment
Process illustrationA trolley-loaded furnace type for thermal processing of large workpieces or castings. Selection coordinates the load…
Configuration on requestView equipment
Equipment for dismantling scrap electric motors and separating accessible components or windings. Selection concerns motor…
Configuration on requestView equipment
This induction furnace melts prepared aluminum charge for casting, ingot production or another receiving process. It is…
Process illustrationA solar panel recycling project connects the panel entering the system with the material fractions required at its exit.…
Configuration on requestView equipment
Process illustrationA continuous mixer for preparing a specified resin-sand molding mixture. Selection focuses on the sand, binder system,…
Configuration on requestView equipment
Process illustrationA connected process direction for producing copper rod through casting and rolling. Specify the copper feed, finished rod…
Configuration on requestView equipment
01A scrap steel preparation route combining feeding, pre-compaction, crushing and magnetic separation. Configure the line around your scrap mix and the requirements of the steel buyer.
Explore the process
02A dry processing route for separating copper-bearing scrap wire into copper granules and plastic fractions. Define the cable mix, preparation and output requirements before selecting the configuration.
Explore the process
03An aluminum scrap processing route combining crushing, screening, magnetic separation and eddy current sorting. Match the equipment to cans, profiles, cast parts or the defined mixed feed.
Explore the process
04A crushing and separation route for pretreated appliance-derived material. Define the upstream preparation and the iron, nonferrous, plastic and light-material fractions required from the line.
Explore the processType, dimensions and composition of the input.
Throughput, output and operating conditions.
Compare the relevant specifications and discuss your site.
Compare loose-scrap baling and machining-chip briquetting through material form, preparation, required compact and the next handling or processing task.
Read the guideCompare chamber, trolley-loaded and rotating-tube furnaces through load form, movement, heating duty and process interfaces before selecting a configuration.
Read the guideDefine frame removal, glass separation and further material recovery as distinct duties when selecting solar panel recycling equipment and project scope.
Read the guide